Computer Fix & Repair

HI,

Problem :

I have problem with my CPU process.it happen when first time I had format my computer.then the problem happen when it start to show this command says :

CMOS checksum error – Defaults loaded
Warning!CPU has been changed or CPU Ratio Changed Fail
Plese re-enter CPU setting in the CMOS setup and remember to save before quit
After press (Del) and enter the CMOS setting and save,it will loading back normaly.

It will be happened again after restart or when on pc.

Solution :

Enter CMOS Setup > press F2 or F12 or [Del] while first boot and you'll be in CMOS
Setup Window. All you need to do is change the Time and Date to recent value >
Save it. If the problem still persist , just change CMOS battery. Maybe its exhausted ( usually currently use the battery for 3 - 5 years )

Problem :

How can i retrieve my workgroup . Im change it when format windows process

Solution :

Control panel > network n internet connection > set up or change your home or small office network > next & next > change workgroup > type workgroup same like previous ( ask your administrator if using LAN in office )

or

My computer > properties > computer name > change ( type ) workgroup..

Hi,

Problem :

Im create 3 account for username, The problem is account one ( 1) is missing when im click Change my account type ...> Camputer administration to account two(2) . After restart, the account one(1) was missing..

Solution :

Start>All Program>Accessories>System Tools>System Restore

Hi,

There have 2 solution can use :

solution 1 :

Enter tool > folder option > view >

1)Choose“show hidden files and folder?
2)Close “hide protected operating system file”
3)Find “desktop.cfg”
4)In that area, please add IconArea_Text=55555 then save

You also can change to other color.. im forgot.. sorry!!

solution 2 :

right klik to file or folder > properties > advanced > un’tick’ compress contents to save hardisk

Right click at My Computer > Properties > Advanced

solution 1

1. Put Windows CD into your drive

2. Boot from CD

3. There will be a Welcome to Setup menu. Press R for Recovery Console. Refer to this web for more instructions :
http://www.webtree.ca/windowsxp/repair_xp….very%20Console:

4. They will ask “Which Windows installation would you like to log onto”. Be sure there have: X:\WINDOWS.. (X:\ is directory for Windows). Then press 1 and Enter. If dont have 1: X:\WINDOWS, please stop and inform me ( in this blog )..

5. They will be asked for Administrator password.. Enter Administrator password.. Just press Enter if no Administrator password..

6. Then, type command below and press Enter

copy drive:\i386\ntldr c:\
copy drive:\i386\ntdetect.com c:\

Replace with ,

drive

With your CD-Rom drive (i.e : E)

7. Then type exit and press enter Enter.. eject your Cd

8. Boot the windows with normal

====================================================================

solution 2

Related errors:
Below are the full error messages that may be seen when the computer is booting.

NTLDR is Missing
Press any key to restart
Boot: Couldn’t find NTLDR
Please insert another disk
NTLDR is missing
Press Ctrl Alt Del to Restart

Cause:
Computer is booting from a non-bootable source.
Computer hard disk drive is not properly setup in BIOS.
Corrupt NTLDR and/or NTDETECT.COM file.
Misconfiguration with the boot.ini file.
Attempting to upgrade from a Windows 95, 98, or ME computer that is using FAT32.
New hard disk drive being added.
Corrupt boot sector / master boot record.
Seriously corrupted version of Windows 2000 or Windows XP.
Loose or Faulty IDE/EIDE hard disk drive cable.
Solutions:

Computer is booting from a non-bootable source
Many times this error is caused when the computer is attempting to boot from a non-bootable floppy disk or CD-ROM. First verify that no floppy diskette is in the computer, unless you are attempting to boot from a diskette.

If you are attempting to boot from a floppy diskette and are receiving this error message it is likely that the diskette does not have all the necessary files and/or is corrupt.

If you are attempting to install Windows XP or Windows 2000 and are receiving this error message as the computer is booting verify that your computer BIOS has the proper boot settings. For example, if you are attempting to run the install from the CD-ROM make sure the CD-ROM is the first boot device, and not the hard disk drive.

Second, when the computer is booting you should receive the below prompt.

Press any key to boot from the CD

Important: When you see this message press any key such as the Enter key immediately, otherwise it will try booting from the hard drive and likely get the NTLDR error again.

Note: If you are not receiving the above message and your BIOS boot options are set properly it’s also possible that your CD-ROM drive may not be booting from the CD-ROM properly. Verify the jumpers are set properly on the CD-ROM drive. Additional information about checking the CD-ROM drive connections can be found on document CH000213.

Additional information: This error has also been known to occur when a memory stick is in a card reader and the computer is attempting to boot from it. If you have any type of card reader or flash reader make sure that no memory stick is inside the computer.

Computer hard disk drive is not properly setup in BIOS

Verify that your computer hard disk drive is properly setup in the BIOS / CMOS setup. Improper settings can cause this error. Additional information on how to enter the BIOS / CMOS setup can be found in document CH000192.

Corrupt NTLDR and/or NTDETECT.COM file

Windows 2000 users

If your computer is using Microsoft Windows 2000 and you are encountering the NTLDR error. Create the below boot.ini file on the floppy diskette drive.

[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINNT
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINNT=”Microsoft Windows 2000 Professional” /fastdetect

Copy the NTLDR and NTDETECT.COM files from another computer using the same Operating System. Both of these files are located in the root directory of the primary hard disk drive. For example, C:\NTLDR and C:\NTDETECT.COM should be the locations of these files on many computers.

Please keep in mind that these files are hidden system files, if you need additional help with viewing hidden files in Windows please see document CH000516.
Once these files have been copied to a floppy diskette reboot the computer and copy the NTLDR and NTDETECT.COM files to the root directory of the primary hard disk drive. Below is an example of what commonly should be performed from the A:\> drive.

copy ntldr c:
copy ntdetect.com c:

After the above two files have been copied, remove the floppy diskette and reboot the computer.

Windows XP users

Insert the Windows XP bootable CD into the computer.
When prompted to press any key to boot from the CD, press any key.
Once in the Windows XP setup menu press the “R” key to repair Windows.
Log into your Windows installation by pressing the “1″ key and pressing enter.
You will then be prompted for your administrator password, enter that password.
Copy the below two files to the root directory of the primary hard disk. In the below example we are copying these files from the CD-ROM drive letter “E”. This letter may be different on your computer.

copy e:\i386\ntldr c:\
copy e:\i386\ntdetect.com c:\

Once both of these files have been successfully copied, remove the CD from the computer and reboot.
Misconfiguration with the boot.ini file

Edit the boot.ini on the root directory of the hard disk drive and verify that it is pointing to the correct location of your Windows Operating System and that the partitions are properly defined. Additional information about the boot.ini can be found on document CH000492.

Attempting to upgrade from a Windows 95, 98, or ME computer that is using FAT32

If you are getting this error message while you are attempting to upgrade to Windows 2000 or Windows XP from Windows 95, Windows 98, or Windows ME running FAT32 please try the below recommendations.

Boot the computer with a Windows 95, Windows 98 or Windows ME bootable diskette.
At the A:\> prompt type:

sys c:

After pressing enter you should receive the “System Transferred” message. Once this has been completed remove the floppy diskette and reboot the computer.
New hard disk drive being added

If you are attempting to add a new hard disk drive to the computer make sure that drive is a blank drive. Adding a new hard disk drive to a computer that already has Windows installed on it may cause the NTLDR error to occur.

If you are unsure if the new drive is blank or not try booting from a bootable diskette and format the new hard disk drive.

Corrupt boot sector / master boot record

It’s possible your computer’s hard disk drive may have a corrupt boot sector and/or master boot record. These can be repaired through the Microsoft Windows Recovery console by running the fixboot and fixmbr commands.

Additional information and help in getting into the Microsoft Windows Recovery console can be found on document CH000627.

Seriously corrupted version of Windows 2000 or Windows XP

If you have tried each of the above recommendations that apply to your situation and you continue to experience this issue it is possible you may have a seriously corrupted version of Microsoft Windows. Therefore we would recommend you reinstall Microsoft Windows 2000 and Windows XP.

If you are encountering this issue during your setup you may wish to completely erase your computer hard disk drive and all of its existing data and then install Microsoft Windows 2000 / Windows XP. Additional information about erasing the computer and starting over can be found on document CH000186.

Loose or Faulty IDE/EIDE hard disk drive cable

This issue has been known to be caused by a loose or fault IDE/EIDE cable. If the above recommendation does not resolve your issue and your computer hard disk drive is using an IDE or EIDE interface. Verify the computer hard disk drive cable is firmly connected by disconnected and reconnecting the cable.

If the issue continues it is also a possibility that the computer has a faulty cable, try replacing the hard disk drive cable with another cable and/or a new cable.

olution 1

STOP: 0xC000021A {Fatal System Error}”

step 1

Start > run > Type regedit >
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

step 2

Click winlogon folder and see for GinaDLL REG_SZ value. If there have a value other than “Msgina.dll”, u are advised to deleted it. If u dont see anything, it use default.

More info : MICROSOFT

credit to : Mohd panda

Solution 1

Start > Run > GPEDIT.MSC

> Computer Configuration
> Administrative Templates
> System
> System Restore

Set Turn off System Restore to Not Configured
Set Turn off Configuration to Not Configured

credit to : P.ramlie

solution 2

Start > run > type ‘regedit’ > HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\SystemRestore
Kalau value “DisableSR” xder, prgi klik Edit >> New >> DWORD value, pastu buatlah value “DisableSR” tu…

Setkan kpada 1….

credit to : kukurue

solution 3

1) Be sure that the System Restore tool is actually running. here’s how you can tell:

A. Go to Start>> Run. Type in: compmgmt.msc [Enter] or click OK
B. In the Computer Management window, expand the Services and Applications category.
C. Click Services
D. Scroll the right pane until you see System Restore Service listed. be sure that it says “Started”. If it says “Stopped”, then you will need to double click the entry and click the “Start” button to start the System Restore Service.

2) Try running System Restore in Safe Mode.

3) Try viewing the event logs to determine a probable cause of the error. here’s how:

A. Go to Start>> Control Panel
B. Select Administrative Tools
C. Click on Computer Management
D. Expand Event Viewer
E. Select System